Got our first Dyno results from a power run today, producing 492bhp at @5900 RPM, and it will run up to 6500 RPM but waiting to run it in a bit more. Our goal was 500bhp which seems very likely, but more importantly our hot cam has toned down the torque, we have lots of low down grunt, but as the revs rise we have lots of power.
This is the first run of the LS – it will be first run in for a while before we do a power run.
Finished the spacer for the bellhousing to dyno and got the housing bolted to the dyno to confirm all was well, then partially loaded the van ready for sticking the engine in the back and off to emerald in the morning, got the engine connected up had to do a slight mod to my engine mounts to fit there fitting but nothing to serious, got the water system plumbed up ,sorted the thermo couples for inlet and outlet water temps connected, sorted some of the wiring but still some way to go on that front, tomorrow fuel etc. so coming along nicely hopefully go for a start late this week.